• SE999_webimage_gss_1080x800
  • GSSIS-180-QWB_9682-RT1-web_1080x800
  • SBDY-320160-SS_8877-RT1-web_1080x800
  • SRDY-320225-SS_RT2_1080x800
X

FINISHES

Black

X

FINISHES

Bronze

X

FINISHES

Almond

X

FINISHES

Biscuit

X

FINISHES

White

X

FINISHES

Satin Nickel

X

FINISHES

Satin Stainless

X

FINISHES

Polished Stainless

Standard Ligature Resistant Grab Bar

DESCRIPTION

When patient or resident safety is of concern, this ligature resistant grab bar provides added security by helping to reduce the potential for self-harm. It incorporates a safety-enhancing, ligature-resistant design featuring a steel plate welded to the bottom of the fixture. Crafted from premium #304 stainless steel, it is durable enough to withstand the rigors of repeated use, it meets all federal specifications for institutional applications and satisfies all dimensional and load requirements specified for ADA applications. It is available with exposed flange in either a 3-hole configuration for screw installation, or No-hole configuration for welding installation.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Standard Lengths: 12”, 16”, 18”, 24”, 30”, 32”, 36”, 42”, 48”
    • Meets federal specification WW-P-541/8b
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in 1-1/2” diameter
  • FINISHES
    Available finish: Satin Stainless
ZOOM IN
SHOWN: GSSI-240-HEW & GSSI-240-HEO

Exposed mounting flanges without holes for weld installation:

MODEL # BAR MOUNTING FLANGES
GSSI-240-HEO 1-1/2” diameter x 18 gauge, .048 x 18” length Exposed, 3” diameter x 10 gauge, .135

Exposed 3-hole mounting flanges for screw installation:

MODEL # BAR MOUNTING FLANGES
GSSI-240-HEW 1-1/2” diameter x 18 gauge, .048 x 18” length Exposed, 3” diameter x 10 gauge, .135

KEY FEATURES

CAN SUPPORT UP TO 250 LBS

Flangeless Ligature Resistant Grab Bar

DESCRIPTION

This safety-enhancing grab bar features a flangeless design that reduces points of contact for a ligature, enhancing security and peace of mind. The fixture incorporates an integrated steel plate that is stitch-welded to the bottom and back of the bar, to provide drainage in a bathroom or shower environment. Fabricated from premium #304 stainless steel, it satisfies all ADA, ANSI and federal specifications for institutional applications when property installed.

  • SPECIFICATIONS
    • Model # GSSIS-180-QWB
    • Made from #304 stainless steel
    • Standard Lengths: 12”, 16”, 18”, 24”, 30”, 32”, 36”, 42”, 48”
    • Meets Federal Specification WW-P-541/8b
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in 1-1/2” diameter
  • FINISHES
    Available finish: Satin Stainless
ZOOM IN
SHOWN: GSSIS-180-QWB

KEY FEATURES

CAN SUPPORT UP TO 250 LBS

Accessibility Seat with Dual Yoke

DESCRIPTION

This shower seat is available in both a Transfer and Bench configuration, both feature a durable, dual-yoke design that offers superior strength and stability. It is crafted from 100% premium, #304 stainless steel to withstand the rigors of daily use, and complies with all ADA load requirements and federal specifications for institutional applications when properly installed.

  • SPECIFICATIONS
    • Available in three configurations:
      • Model # SLDY-320225-SS: Left-handed Transfer Seat
      • Model # SRDY-320225-SS: Right-handed Transfer Seat
      • Model # SBDY-320160-SS: Bench seat
    • Seat top: made of one-piece #304 stainless steel (16 gauge, .060)
    • Seat top design: One-piece solid stainless steel, no drain slots
    • Dual Yoke: #304 stainless steel (1” diameter x 18 gauge, .048) with flanges (3” diameter x 10 gauge, .135), welded to tubing (1” round x 18 gauge, .048)
    • Available frame finish: Satin Stainless, made from #304 stainless steel
    • Available size: 32”W x 22-1/2”D
    • Meets Federal Specification WW-P-541/8b
    • Approved by the California Department of Corrections and Rehabilitation
    • Supports loads in excess of 900 lbs. when properly installed
ZOOM IN
SHOWN: SBDY-320160-SS

Accessibility Seat – Transfer Seat with Dual Yoke, Right- or Left-Handed Configuration

DESCRIPTION

An L-shaped transfer seat fabricated from 100% premium, #304 stainless steel with dual yokes, to provide superior strength and security. Available in Left or Right-Hand configurations, it meets all federal specifications for institutional applications.

  • SPECIFICATIONS
    • Available in two configurations:
      • Model # SLDY-320225-SS:  Left-handed
      • Model # SRDY-320225-SS: Right-handed
    • Seat top material options:  made of one-piece #304 stainless steel (16 gauge, .060)
    • Seat top design:  One-piece solid stainless steel, no drain slots
    • Dual Yoke:  #304 stainless steel (1″ diameter x 18 gauge, .048) with flanges (3″ diameter x 10 gauge, .135), welded to tubing (1″ round x 18 gauge, .048)
    • Available frame finish: Satin Stainless, made from #304 stainless steel
    • Available size:  32″W x 22-1/2″D
    • Approved by California Department of Corrections and Rehabilitation
    • Supports up to 1,000 lbs. when properly installed
ZOOM IN
SHOWN: SRDY-320225-SS

KEY FEATURES

WILL SUPPORT UP TO 1,000 LBS. WHEN PROPERLY INSTALLED
CUSTOM SIZES AVAILABLE
MADE ENTIRELY OF #304 STAINLESS STEEL