• gss
  • GSM-360-QCR
  • GSM1-480-QCR
  • GST-160320-QCR
  • GSLT-360240-QCR
  • GSVL-200200-QCR
  • GSU-300360-QCR
  • GSD-330180-QCR
  • GSW-330300-QCR
  • GSWR-330300-QCR
  • GSB-120120-QCR
  • GSWW-240240-QCR
  • GSFS_330300_QCR
X

FINISHES

Black

X

FINISHES

Bronze

X

FINISHES

Almond

X

FINISHES

Biscuit

X

FINISHES

White

X

FINISHES

Satin Nickel

X

FINISHES

Satin Stainless

X

FINISHES

Polished Stainless

Straight Grab Bar

DESCRIPTION

Our Signature Series of standard grab bars are fabricated using American quality craftsmanship from premium #304 stainless steel, to satisfy all dimensional and load requirements specified for ADA applications. Grab bars are available in a wide range of shapes and sizes, including standard and custom configurations with concealed or exposed flanges, and multiple finish options.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Wall clearance: 1-1/2”
    • Standard Lengths: 12”, 16”, 18”, 24”, 30”, 32”, 36”, 42”, 48”
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSS-180-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSS-180-QCR 1-1/4” diameter x 18 gauge, .048 x 18” length Concealed, 3” diameter x 14 gauge, .075 Satin Finish, 3” diameter x 22 gauge, .030
GSS-180-HCR 1-1/2” diameter x 18 gauge, .048 x 18” length Concealed, 3” diameter x 14 gauge, .075 Satin Finish, 3” diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSS-180-QEW 1-1/4” diameter x 18 gauge, .048 x 18” length Exposed, 3” diameter x 10 gauge, .135
GSS-180-HEW 1-1/2” diameter x 18 gauge, .048 x 18” length Exposed, 3” diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Straight Grab Bar with Center Post

DESCRIPTION

This grab bar features a center post for added stability. It is made from premium #304 stainless steel with concealed, 5-hole or exposed, 3-hole mounting flanges, to provide a sleek appearance.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Wall clearance: 1-1/2”
    • Standard Lengths: 36”, 42”, 48”, 52″, 54″, 60″
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSM-360-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSM-360-QCR 1-1/4” diameter x 18 gauge, .048 x 36” length Concealed, 3” diameter x 14 gauge, .075 Satin Finish, 3” diameter x 22 gauge, .030
GSM-360-HCR 1-1/2” diameter x 18 gauge, .048 x 36” length Concealed, 3” diameter x 14 gauge, .075 Satin Finish, 3” diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSM-360-QEW 1-1/4” diameter x 18 gauge, .048 x 36” length Exposed, 3” diameter x 10 gauge, .135
GSM-360-HEW 1-1/2” diameter x 18 gauge, .048 x 36” length Exposed, 3” diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Straight Grab Bar with Center Post and One Straight End

DESCRIPTION

A grab bar with a center post for added stability, it features one curved end and one straight end, making it ideal for mounting in a corner. Made from #304 stainless steel, it features concealed, 5-hole or exposed, 3-hole mounting flanges, and is available in a range of sizes and finishes.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Wall clearance: 1-1/2″
    • Standard Lengths: 36″, 42″, 48″, 52″, 54″, 60″
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSM1-480-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSM1-180-QCR 1-1/4″ diameter x 18 gauge, .048 x 18″ length Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030
GSM1-180-HCR 1-1/2″ diameter x 18 gauge, .048 x 18″ length Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSM1-180-QEW 1-1/4″ diameter x 18 gauge, .048 x 18″ length Exposed, 3″ diameter x 10 gauge, .135
GSM1-180-HEW 1-1/2″ diameter x 18 gauge, .048 x 18″ length Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Tub and Shower Grab Bar

DESCRIPTION

A versatile tub and shower grab bar with a curved design that enables it to be mounted around corners, to provide enhanced mobility and support while bathing. Available with concealed, 5-hole mounting flanges or exposed, 3-hole mounting flanges.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Wall clearance: 1-1/2″
    • Standard Sizes:
      • 16”W x 16”D / 16”W x 32”D
      • 24″W x 24″D / 20″W x 24″D
      • 24″W x 36″D / 24″W x 48″D
      • 30″W x 30″D / 36″W x 36″D
      • 36″W x 48″D / 36″W x 54″D
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GST-160320-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GST-240240-QCR 1-1/4″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030
GST-240240-HCR 1-1/2″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GST-240240-QEW 1-1/4″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Exposed, 3″ diameter x 10 gauge, .135
GST-240240-HEW 1-1/2″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Two-Way Tub and Shower Bar

DESCRIPTION

A durable, #304 stainless steel tub and shower bar that combines horizontal and vertical support, to provide extra security when entering, exiting, sitting or standing in a tub or shower. It is available in a range of sizes, in both right-handed and left-handed configurations.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Wall clearance: 1-1/2″
    • Standard Sizes:
      • 36″W x 24″D x 24″H
      • 48″W x 24″D x 24″H
      • 54″W x 24″D x 24″H
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSTWL-360240-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSTWL-360240-QCR: Left-handed 1-1/4″ diam x 18 ga, .048 x 36″ x 24″ x 24″ lengths Concealed, 3″ diam x 14 ga, .075 Satin Finish, 3″ diam x 22 ga, .030
GSTWR-360240-HCR: Right-handed 1-1/2″ diam x 18 ga, .048 x 36″ x 24″ x 24″ lengths Concealed, 3″ diam x 14 ga, .075 Satin Finish, 3″ diam x 22 ga, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSTWL-360240-HEW: Left-handed 1-1/2″ diameter x 18 gauge, .048 x 36″ x 24″ x 24″ lengths Exposed, 3″ diameter x 10 gauge, .135
GSTWR-360240-HEW: Right-handed 1-1/2″ diameter x 18 gauge, .048 x 36″ x 24″ x 24″ lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Vertical Angle Bar

DESCRIPTION

Made from #304 stainless steel, this grab bar provides two kinds of support, enabling users to enjoy added security when entering, exiting, sitting or standing in a tub or shower. It is available in both right-handed and left-handed configurations.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Wall clearance: 1-1/2″
    • Standard Sizes:
      • 16″W x 16″H
      • 16″W x 32″H
      • 20″W x 20″H
      • 24″W x 24″H
      • 30″W x 30″H
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSVL-240240-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSVL-240240-QCR: Left-handed 1-1/4″ diam x 18 gauge, .048 x 24″ x 24″ lengths Concealed, 3″ diam x 14 gauge, .075 Satin Finish, 3″ diam x 22 gauge, .030
GSVL-240240-HCR: Left-handed 1-1/2″ diam x 18 gauge, .048 x 24″ x 24″ lengths Concealed, 3″ diam x 14 gauge, .075 Satin Finish, 3″ diam x 22 gauge, .030
GSVR-240240-QCR: Right-handed 1-1/4″ diam x 18 gauge, .048 x 24″ x 24″ lengths Concealed, 3″ diam x 14 gauge, .075 Satin Finish, 3″ diam x 22 gauge, .030
GSVR-240240-HCR: Right-handed 1-1/2″ diam x 18 gauge, .048 x 24″ x 24″ lengths Concealed, 3″ diam x 14 gauge, .075 Satin Finish, 3″ diam x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSVR-240240-QEW: Right-handed 1-1/4″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Exposed, 3″ diameter x 10 gauge, .135
GSVR-240240-HEW: Right-handed 1-1/2″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

U-Shaped Shower Bar

DESCRIPTION

With its versatile, wraparound design, this grab bar provides support on three sides, making it ideal for entering, exiting or moving about in the shower. It is manufactured from durable #304 stainless steel, and can support more than 300 lbs. when installed properly.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Wall clearance: 1-1/2″
    • Standard Sizes:
      • 30″W x 36″D x 30″W
      • 30″W x 48″D x 30″W
      • 30″W x 54″D x 30″W
      • 30″W x 60″D x 30″W
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSU-300360-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSU-300360-QCR 1-1/4″ diameter x 18 gauge, .048 x 30″ x 36″ x 30 lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030
GSU-300360-HCR 1-1/2″ diameter x 18 gauge, .048 x 30″ x 36″ x 30 lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSU-300360-QEW 1-1/4″ diameter x 18 gauge, .048 x 30″ x 36″ x 30 lengths Exposed, 3″ diameter x 10 gauge, .135
GSU-300360-HEW 1-1/2″ diameter x 18 gauge, .048 x 30″ x 36″ x 30 lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Drinking Fountain Bar

DESCRIPTION

The floor mount and additional wall support on this grab bar provides substantial security, to assist users when accessing a drinking fountain from a sitting or standing position. It is available in a range of finishes.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Standard Size: 33″H x 18″D
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSD-330180-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSD-330180-QCR 1-1/4″ diameter x 18 gauge, .048 x 33″ x 18″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030
GSD-330180-HCR 1-1/2″ diameter x 18 gauge, .048 x 33″ x 18″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSD-330180-QEW 1-1/4″ diameter x 18 gauge, .048 x 33″ x 18″ lengths Exposed, 3″ diameter x 10 gauge, .135
GSD-330180-HEW 1-1/2″ diameter x 18 gauge, .048 x 33″ x 18″ lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Wall-to-Floor Bar

DESCRIPTION

This durable wall-to-floor bar is ideal for mounting beside a toilet, to provide users with support while getting up and down. It is available with or without a below ground extension.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Standard Size: 33″H x 30″D
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSW-330300-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSW-330300-QCR 1-1/4″ diameter x 18 gauge, .048 x 33″ x 30″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030
GSW-330300-HCR 1-1/2″ diameter x 18 gauge, .048 x 33″ x 30″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSW-330300-QEW 1-1/4″ diameter x 18 gauge, .048 x 33″ x 30″ lengths Exposed, 3″ diameter x 10 gauge, .135
GSW-330300-HEW 1-1/2″ diameter x 18 gauge, .048 x 33″ x 30″ lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Wall-to-Floor Bar with Side Leg

DESCRIPTION

A wall-to-floor bar with a second side leg provides users with additional safety and security while getting up and down. It is designed for mounting to the wall beside a toilet, and is available in left-handed or right-handed configurations.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Standard Size: 33″H x 30″D
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Polished Brass, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSWR-330300-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSWL-330300-QCR: Left-handed 1-1/4″ diam x 18 ga, .048 x 33″ x 30 lengths Concealed, 3″ diam x 14 ga, .075 Satin Finish, 3″ diam x 22 ga, .030
GSWL-330300-HCR: Left-handed 1-1/2″ diam x 18 ga, .048 x 33″ x 30 lengths Concealed, 3″ diam x 14 ga, .075 Satin Finish, 3″ diam x 22 ga, .030
GSWR-330300-QCR: Right-handed 1-1/4″ diam x 18 ga, .048 x 33″ x 30 lengths Concealed, 3″ diam x 14 ga, .075 Satin Finish, 3″ diam x 22 ga, .030
GSWR-330300-HCR: Right-handed 1-1/2″ diam x 18 ga, .048 x 33″ x 30 lengths Concealed, 3″ diam x 14 ga, .075 Satin Finish, 3″ diam x 22 ga, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSWL-330300-QEW: Left-handed 1-1/4″ diameter x 18 gauge, .048 x 33″ x 30 lengths Exposed, 3″ diameter x 10 gauge, .135
GSWR-330300-QEW: Right-handed 1-1/4″ diameter x 18 gauge, .048 x 33″ x 30 lengths Exposed, 3″ diameter x 10 gauge, .135
GSWL-330300-HEW: Left-handed 1-1/2″ diameter x 18 gauge, .048 x 33″ x 30 lengths Exposed, 3″ diameter x 10 gauge, .135
GSWR-330300-HEW: Right-handed 1-1/2″ diameter x 18 gauge, .048 x 33″ x 30 lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Boomerang Bar

DESCRIPTION

Offers horizontal and vertical support, to assist users when moving between sitting and standing positions. It is designed for optimal use when mounted to the wall beside a toilet, and can support more than 300 lbs. when properly installed.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Wall clearance: 1-1/2″
    • Standard Size: 12″ x 12″ x 120 degree
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSB-120120-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSB-120120-QCR 1-1/4″ diameter x 18 gauge, .048 x 12″ x 12″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030
GSB-120120-HCR 1-1/2″ diameter x 18 gauge, .048 x 12″ x 12″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSB-120120-QEW 1-1/4″ diameter x 18 gauge, .048 x 12″ x 12″ lengths Exposed, 3″ diameter x 10 gauge, .135
GSB-120120-HEW 1-1/2″ diameter x 18 gauge, .048 x 12″ x 12″ lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Wall-to-Wall Straddle

DESCRIPTION

This fixture enables users to securely raise and lower themselves when using the toilet. It is designed for mounting to a wall behind a toilet, and complies with ADA guidelines when properly installed.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Standard Size: 24″W x 24″D
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Polished Brass, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSWW-240240-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSWW-240240-QCR 1-1/4″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030
GSWW-240240-HCR 1-1/2″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSWW-240240-QEW 1-1/4″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Exposed, 3″ diameter x 10 gauge, .135
GSWW-240240-HEW 1-1/2″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES

Floor-to-Floor Straddle

DESCRIPTION

When mounted to the floor around a toilet, this fixture provides users with secure bars to raise and lower themselves. Manufactured using premium #304 stainless steel, this bar meets and exceeds the minimum 250 lb. load requirement when properly installed.

  • SPECIFICATIONS
    • Made from #304 stainless steel
    • Standard Size: 33″H x 30″D
    • Meets and exceeds the minimum 250 lb. load requirement when properly installed
    • Available in two standard diameters
    • Custom sizes and finishes are available to meet your design specifications.
  • FINISHES
    Satin Stainless, Polished Stainless, Peened with Satin Ends, Peened with Polished Ends, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
ZOOM IN
SHOWN: GSFS-330300-QCR

Concealed 5-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES FLANGE COVERS
GSFS-330300-QCR 1-1/4″ diameter x 18 gauge, .048 x 33″ x 30″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030
GSFS-330300-HCR 1-1/2″ diameter x 18 gauge, .048 x 33″ x 30″ lengths Concealed, 3″ diameter x 14 gauge, .075 Satin Finish, 3″ diameter x 22 gauge, .030

Exposed 3-hole mounting flanges:

MODEL # BAR MOUNTING FLANGES
GSFS-330300-QEW 1-1/4″ diameter x 18 gauge, .048 x 33″ x 30″ lengths Exposed, 3″ diameter x 10 gauge, .135
GSFS-330300-HEW 1-1/2″ diameter x 18 gauge, .048 x 24″ x 24″ lengths Exposed, 3″ diameter x 10 gauge, .135

KEY FEATURES

MEETS ALL ADA CODES AND FEDERAL SPECIFICATIONS
CAN SUPPORT UP TO 250 LBS
CUSTOM FINISHES AND SIZES